Difficulty level: Easy
Time consumption: 10 minutes
Tools: 10 mm wrench, PH3 screwdriver
Components: 1 handle, 1 spring washer, 1 M6 Phillips screw and 1 nut
Please follow these instructions to install the new door handle:
1. If a handle is already installed, uninstall this by unscrewing the phillips screw:
2. Use the screw, washer, and nut that was used to mount the old handle. Mount the new handle by placing the washer and the handle on the mounting piece on the door. Insert the screw and screw it into place:
3. To make sure that the screw stays put, use your fingers to screw the nut onto the screw:
4. Use the PH3 screwdriver and the 10 mm wrench to tighten the screw and the nut, while still making sure that the handle can move:
5. You have now installed the new handle.