1. Detach the four screws that hold the top plate of the stove in place. There are two screws in the back of the stove (see image 1) and one on each side of the stove (see image 2 and 3).
Image 1: Two screws in the back of the stove
Image 2: One screw on the left side of the stove Image 3: One screw on the right side of the stove
2. Lift up and take off the top plate.
3. Open the door and remove the pin on the hinge (see image 4) with pliers.
Image 4: Remove the pin with pliers
4. Take the door off the hinges.
5. You now have two options:
a) The position of the door is too low and needs to be raised.
To raise the door, put an extra washer on the hinge (see image 5). If it is not enough with the extra washer, try loosen the two screws on the top of the stove.
Image 5: Put an extra washer on the hinge Image 6: Loosen the two screws at the top of the stove if necessary
b) The door is hanging
If the door is hanging, loosen the two screws at the bottom of the stove and press the hinge 1 mm to the right.
Image 7: Loosen the two screws at the bottom of the stove
6. Attach the door again. Test if the door closes correctly before mounting the top plate again.
7. Finally, mount the top plate and attach it with the four screws (two in the back of the stove and one on each side of the stove).